Using the Calculator - second step
18 Jan 2015

# Using the Calculator - second step

Guide to Environmental Ratings used by the Dew Point Calculator

Natural Aging
 TWPI Value (years) Interpretation ≥75 45-75 ≤45

Mechanical Damage
 % EMC Interpretation ≥ 5 AND ≤ 12.5 ≤ 4.9 OR ≥ 12.6
NOTE: On the Dew Point Calculator, there is no "Good" rating for Mechanical Damage

Mold Risk
 Days to Mold Interpretation No Risk > 1 day to mold

Metal Corrosion
 % EMC Interpretation ≤ 7.0 ≥ 7.1 and ≤ 10.5 ≥ 10.6

The DP Calculator Preservation Evaluation is based on IPI’s Preservation Metrics™ which were developed to transform temperature and relative humidity data into quantitative numerical measures of material decay risk.

Each combination of T, RH and DP determines the environmental rating for four major forms of material decay—natural aging or chemical decay, mechanical damage or dimensional change, mold risk, and metal corrosion.

Note that these ratings evaluate a static condition and don’t take change over time into consideration. The Environmental Ratings and Preservation Metrics would vary if you were evaluating data collected over a period of time.

PI = Preservation Index

PI represents the overall rate of chemical decay in organic materials based on a constant T and RH. A higher number indicates a slower the rate of chemical decay. (IPI developed the Time-Weighted Preservation Index, or TWPI, to illustrate chemical decay as the environment changes over time.)

%EMC = % Equilibrium Moisture Content

Hygroscopic (water-absorbing) materials change size and shape depending on the amount of water they contain. These physical reactions are based on the amount of moisture in the air (RH). Maximum %EMC (≤ 12.5%) indicates a damp environment while Minimum %EMC (≤ 5%) identifies a dry environment. These conditions, as well as wide and/or frequent fluctuations can result in mechanical damage.

MRF = Mold Risk Factor

The MRF represents the risk of mold germination and subsequent growth. A value of 0.5 or less indicates an environment with little or no risk of biological decay. 0.5 indicates that mold spores are half way to germination. In a real-life situation the environment would be evaluated over time to create a running sum of progress toward mold germination.

Hola mi nombre es Michael. Voy a intentar a ayudarte si tienes problemas con humedades in tu casa.

Refresh